AFLACARD TOTAL
Art. No.: RBRP38
Product info
Intended use
A qualitative screening card for the detection of different aflatoxin total levels in food and feed samples.
General Information
The kit is based on monoclonal antibody technology which has the advantage of being highly specific and sensitive while the test format is rapid and simple to perform. The screening procedure is intended to serve as an indicator of the presence of toxins at various screening levels according to international legislation.
The toxins are extracted from the sample, filtered and passed through a clean-up column before being diluted and applied to the card. The conjugate is applied to the membrane and unbound conjugate is then removed by washing. A colourless substrate is added and the card is incubated for five minutes. Finally a stop solution is applied to the membrane. A purple spot must appear at the control site to indicate that the test is valid. A purple spot at the sample site shows that the contamination is less than the cut off value of the card. No colour at the sample site indicates contamination at a higher level than the cut off of the card. The assay takes approximately 10 minutes to perform.
Benefits:
- The technology used in the test kit is highly specific and sensitive.
- A further advantage is the easy application of the test.
- Low expenditure of time.
Videos
By loading the video, you agree to YouTube's privacy policy.
Learn more
Dear customers,
we now provide the documents for our products in an electronic format which include the Instructions for Use (IFU), Safety Data Sheets (SDS), Application notes and the Certificate of Analysis (CoA). For batches placed on the market after 1st June 2023, you can find our documents on the eIFU portal eifu.r-biopharm.com/rbr.
| Specifications | |
|---|---|
| Art. No | RBRP38 |
| Test format | 10 cards containing 20 tests and controls |
| Sample preparation | A representative sample should be obtained by following an officially recognised sampling procedure. Sample is extracted using solvent, filtered and passed through an solid phase extraction column (supplied in the test kit) before applying to the test card. |
| Incubation time | The total assay time takes approximately 10 minutes to perform. |
| LOD (Detection Limit) | Qualitative detection at various screening levels |
| Detected analyte | Aflatoxin B1, Aflatoxin B2, Aflatoxin G1 and Aflatoxin G2 |
| Available application notes | Methods are available for all matrices covered by legislation as well as additional commodities. Please contact your local R-Biopharm distributor for further information. |
